简介

Hard drives store most of the information on a computer. The hard drive of a computer must be replaced if the computer crashes. Hard drive replacement is an important skill for desktop PC users.

配件

无需配件。

  1. Unplug the computer from the power supply before any maintenance or disassembly.
    • Unplug the computer from the power supply before any maintenance or disassembly.

    • Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.

    • These screws can usually be removed by hand.

    • Be sure to wear an anti-static bracelet or use and anti-static mat to ensure important components are not damaged by static electricity.

  2. Next, remove the side panel of the computer case to allow access into the computer. Slide the panel towards the back of the computer and lift it up to remove. If there is a fan mounted on the side panel, make sure to unplug the cable before fully removing the panel.
    • Next, remove the side panel of the computer case to allow access into the computer. Slide the panel towards the back of the computer and lift it up to remove.

    • If there is a fan mounted on the side panel, make sure to unplug the cable before fully removing the panel.

  3. Remove two Phillips #2 head 5mm screws from the back side of the computer case.
    • Remove two Phillips #2 head 5mm screws from the back side of the computer case.

  4. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. Next, remove the side panel of the computer case to allow access into the computer. Next, remove the side panel of the computer case to allow access into the computer.
    • Next, remove the side panel of the computer case to allow access into the computer.

  6. Remove two Phillips #2 head 5mm screws holding the hard drive in place.
    • Remove two Phillips #2 head 5mm screws holding the hard drive in place.

  7. Remove two Phillips #2 head 5mm screws holding in the other side of the hard drive.
    • Remove two Phillips #2 head 5mm screws holding in the other side of the hard drive.

  8. Slide the hard drive out from the metal casing.
    • Slide the hard drive out from the metal casing.

  9. Remove the cables from the back of the hard drive.
    • Remove the cables from the back of the hard drive.

结论

To reassemble your device, follow these instructions in reverse order.

46等其他人完成本指南。

Rubin Girling

于2015年04月14日注册

556 信誉积分

撰写一个指南

团队

Cal Poly, Team 4-5, Maness Spring 2015 Cal Poly, Team 4-5, Maness Spring 2015 的会员

CPSU-MANESS-S15S4G5

4 名成员

创作了21篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 11

过去的30天: 32

总计 5,004