修复你的物品 社区 商店

Dell XPS 15 9550 Back/Underside Panel Replacement

简介

Before the majority of components can be accessed to be replaced, the back panel will need to come off.

你所需要的

  1. Dell XPS 15 9550 Back/Underside Panel Replacement, Back/Underside Panel: 步骤 1 中的图像 1，1

    • Turn the laptop upside down.

    • Make sure the laptop is turned off.

    • Use a T5 Torx Screwdriver to remove the ten 3 mm long screws from the perimeter of the back of the laptop.

    编辑

  3. Dell XPS 15 9550 Back/Underside Panel Replacement: 步骤 2 中的图像 1，2 Dell XPS 15 9550 Back/Underside Panel Replacement: 步骤 2 中的图像 2，2

    • Open up the information panel door (on the middle of the back side).

    • While holding the door open, use a Phillips #00 Screwdriver to remove the two 10 mm long screws.

    编辑

  4. Dell XPS 15 9550 Back/Underside Panel Replacement: 步骤 3 中的图像 1，3 Dell XPS 15 9550 Back/Underside Panel Replacement: 步骤 3 中的图像 2，3 Dell XPS 15 9550 Back/Underside Panel Replacement: 步骤 3 中的图像 3，3

    • Carefully lift the 2 corners of the back panel close to the hinge upwards, to release the whole panel.

    • Do not force the panel off. If it does not come off easily, try to use a plastic spudger where it is stuck.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

12等其他人完成本指南。

作者

与3其他贡献者

Brandon Schmidt

于10/04/18注册

2,090 声望

创作了3篇指南

徽章: 14

+ 11更多徽章

团队

UW Stout, Team S6-G1, Ogden Fall 2018 UW Stout, Team S6-G1, Ogden Fall 2018 的会员

UWSTOUT-OGDEN-F18S6G1

4 名成员

创作了23篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 14

过去 30 天： 96

总计 12,389