跳转到主内容

修复你的物品

维修的权力

商店

已存档
已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。
已存档

简介

Click here for the updated version of this guide. The guide you are currently viewing is archived here for historical purposes only.

  1. Remove the eight 4 mm T5 Torx screws from the bottom cover. Remove the eight 4 mm T5 Torx screws from the bottom cover.
    • Remove the eight 4 mm T5 Torx screws from the bottom cover.

  2. Use a plastic opening tool to pry open the 'XPS' flap in the middle. Use a plastic opening tool to pry open the 'XPS' flap in the middle.
    • Use a plastic opening tool to pry open the 'XPS' flap in the middle.

  3. Remove the single Phillips screw hidden beneath the flap.
    • Remove the single Phillips screw hidden beneath the flap.

  4. Use opening picks or a plastic pry tool to pry open the case clips, beginning from the back edge.
    • Use opening picks or a plastic pry tool to pry open the case clips, beginning from the back edge.

  5. Remove the bottom cover.
    • Remove the bottom cover.

  6. Remove the black, 4 mm Phillips #000 screw on the right of the SSD.
    • Remove the black, 4 mm Phillips #000 screw on the right of the SSD.

    • The SSD card will pop up at a 45-degree angle after the screw is removed.

  7. Gently lift the SSD  card with your hand to pull it up and to the right. Gently lift the SSD  card with your hand to pull it up and to the right.
    • Gently lift the SSD card with your hand to pull it up and to the right.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Jay

于2017年05月15日注册

261 信誉积分

创作了2篇指南

团队

Cal Poly, Team S21-G6, Livingston Spring 2017 Cal Poly, Team S21-G6, Livingston Spring 2017 的会员

CPSU-LIVINGSTON-S17S21G6

5 名成员

创作了24篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 6

总计 2,138