跳转到主内容

修复你的物品

维修的权力

商店

已存档
已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。
已存档

简介

Click here for the updated version of this guide. The guide you are currently viewing is archived here for historical purposes only.


  1. Remove the eight 4 mm T5 Torx screws from the bottom cover. Remove the eight 4 mm T5 Torx screws from the bottom cover.
    • Remove the eight 4 mm T5 Torx screws from the bottom cover.

  2. Use a plastic opening tool to pry open the 'XPS' flap in the middle. Use a plastic opening tool to pry open the 'XPS' flap in the middle.
    • Use a plastic opening tool to pry open the 'XPS' flap in the middle.

  3. Remove the single Phillips screw hidden beneath the flap.
    • Remove the single Phillips screw hidden beneath the flap.

  4. Use opening picks or a plastic pry tool to pry open the case clips, beginning from the back edge.
    • Use opening picks or a plastic pry tool to pry open the case clips, beginning from the back edge.

  5. Remove the bottom cover.
    • Remove the bottom cover.

  6. Remove the four 3 mm Phillips #0 screws located on each corner of the battery. Remove the four 3 mm Phillips #0 screws located on each corner of the battery.
    • Remove the four 3 mm Phillips #0 screws located on each corner of the battery.

  7. Pull the battery cable connector towards the battery to disconnect it from its socket. Do not pull up.
    • Pull the battery cable connector towards the battery to disconnect it from its socket.

    • Do not pull up.

  8. Peel up any tape securing the speaker cables to the battery.
    • Peel up any tape securing the speaker cables to the battery.

    • You do not need to remove the speakers, only the tape, allowing the battery to be removed out under the speaker cables.

  9. Remove the battery.
    • Remove the battery.

结论

To reassemble your device, follow these instructions in reverse order.

23等其他人完成本指南。

Ella Herrmann

于2017年04月24日注册

1,339 信誉积分

创作了3篇指南

团队

Cal Poly, Team S21-G6, Livingston Spring 2017 Cal Poly, Team S21-G6, Livingston Spring 2017 的会员

CPSU-LIVINGSTON-S17S21G6

5 名成员

创作了24篇指南

There is a #00 Phillips under the XPS cover on the bottom. Also one of the #0 screws holding the battery down is #00. It is not necessary to remove the speakers but the wires are taped to the battery so pick and remove the tape.

scott Brawner - 回复

Took me about 45 minutes.

Couple of complexities:

1. The speaker removal, it’s easier just to unscrew and pull out that way. Moreover, it’s easier the same way to replace, the problem is if you push in the speakers can remain wobbly unless you properly attach to the flexible plastic things.

2. When replacing the screws on the battery, do the little screw first. It shows it on the images, but doesn’t mention it, it’s a different sized screw (step 3).

3. Removing the screws on the back of the laptop is tough unless you have a good screw driver. In the end, I bought one from China from Aliexpress that was bang on what I needed.

Daniel Offer - 回复

Does anyone have a source for a replacement battery? I checked Amazon but reviews were sketchy at best.

Andrew Chervenak - 回复

I was concerned about the Amazon reviews as well. I ordered my battery directly from Dell for $85.

Samuel Adams -

Great guide! Came in real handy when I needed to replace a swollen battery.

Although the speaker removal part can be skipped completely.

Just remove the 4 Philip battery screws and peel off the black tapes securing the red/white speaker wires would be sufficient to allow the battery to slide right off.

Michael Wu - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 20

总计 19,489