配件

无需配件。

  1. Slide the battery release latch until it clicks into place.
    • Slide the battery release latch until it clicks into place.

    • Slide the battery out of the battery bay.

  2. Turn the computer over and loosen the six captive screws on the base cover.
    • Turn the computer over and loosen the six captive screws on the base cover.

    • Lift the base cover off the computer.

    • Remove the two screws that secure the hard drive to the computer base.

    • Slide the hard drive away from the connector using the pull-tab.

    • Tilt the hard drive by 45-degrees and lift it out of the computer base.

    • Remove the four screws that secure the hard drive to the hard drive bracket.

    • Lift the hard drive off the hard drive bracket.

结论

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

于2018年02月28日注册

35,878 信誉积分

创作了408篇指南

团队

Informative Technologies Inc. Informative Technologies Inc. 的会员

Community

15 名成员

创作了925篇指南

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 4

总计 34