1. Turn the system badge fap over and place it on the base cover.
    • Turn the system badge fap over and place it on the base cover.

      • Remove the screws that secure the base cover to the computer. Release and remove the base cover from the computer.

      • NOTE: To remove the screws from the base cover, use a T5 Torx screwdriver.

        • Lift up and remove the base cover from the computer.

  2. Disconnect the battery cable from the system board [1].
    • Disconnect the battery cable from the system board [1].

    • Remove the screws that secure the battery to the computer.

    • Lift the battery off the computer [2].

    • Disconnect the hard-drive cable from the system board [1].

    • Remove the screws that secure the hard drive to the computer.

    • Lift the hard drive off the computer [2].

    • Disconnect the hard-drive cable from the hard drive [1].

    • Remove the screws that secure the hard-drive bracket to the hard drive.

    • Lift the hard drive off the hard-drive bracket [2].

结论

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

于2018年02月28日注册

35,878 信誉积分

创作了408篇指南

团队

Informative Technologies Inc. Informative Technologies Inc. 的会员

Community

15 名成员

创作了925篇指南

浏览统计数据:

过去的24小时: 1

过去的7天: 7

过去的30天: 29

总计 295