简介

Replace the Heat Sink on the Motherboard to maintain optimal performance

工具

无需工具。

配件

无需配件。

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

    添加评论

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    添加评论

    • Remove the large blue cover from the computer, there are no screws or tabs keeping it in place.

    添加评论

    • Press down on the release tab above the heat sink.

    添加评论

    • Pull the heat sink out of the computer while pressing on the release tab.

    • When reassembling make sure to clean the processor and heat sink of all old thermal paste and apply new paste to the processor

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Tom

于2010年10月04日注册

799 信誉积分

创作了7篇指南

团队

Cal Poly, Team 22-4, Maness Fall 2010 Cal Poly, Team 22-4, Maness Fall 2010 的会员

CPSU-MANESS-F10S22G4

4 名成员

创作了13篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 12

总计 5,650