简介

Replace the Dead Battery on the Motherboard

配件

无需配件。

Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
  • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

  • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

添加评论

Lay the computer on its side; you will see a blue knob. Turn this knob 90 deg clockwise.
  • Lay the computer on its side; you will see a blue knob.

  • Turn this knob 90 deg clockwise.

添加评论

Slide the panel case forward about 1/2 inch while knob is turned. Lift panel case off computer.
  • Slide the panel case forward about 1/2 inch while knob is turned.

  • Lift panel case off computer.

添加评论

Unplug the blue cable that connects the hard drive to the motherboard. Unplug the blue cable that connects the hard drive to the motherboard.
  • Unplug the blue cable that connects the hard drive to the motherboard.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view). Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).
  • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

添加评论

Squeeze the release tabs on either side of the hard drive.
  • Squeeze the release tabs on either side of the hard drive.

添加评论

Slide the Hard Drive out while squeezing the tabs. Slide the Hard Drive out while squeezing the tabs.
  • Slide the Hard Drive out while squeezing the tabs.

添加评论

Under the hard drive, there is a circular, silver battery connected to the motherboard.
  • Under the hard drive, there is a circular, silver battery connected to the motherboard.

  • Use a spudger to gently pry the battery from the motherboard.

添加评论

Lift the battery out of the motherboard.
  • Lift the battery out of the motherboard.

添加评论

Upon replacement, simply push the battery into the motherboard. Upon replacement, simply push the battery into the motherboard. Upon replacement, simply push the battery into the motherboard.
  • Upon replacement, simply push the battery into the motherboard.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

9等其他人完成本指南。

Tom

于2010年10月04日注册

799 信誉积分

创作了7篇指南

团队

Cal Poly, Team 22-4, Maness Fall 2010 Cal Poly, Team 22-4, Maness Fall 2010 的会员

CPSU-MANESS-F10S22G4

4 名成员

创作了13篇指南

that particular battery holder looked hard to get out- no pop out lever, thought i’d break it gouging it out!

neverts “itchytastyurr” ennud - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 6

过去的30天: 17

总计 10,789