Turn the laptop over so that the bottom is facing up.
  • Turn the laptop over so that the bottom is facing up.

  • Remove the two #0 3 mm screws holding the cover plate.

添加评论

Push both metal retaining clips outward at the same time using your hands carefully.
  • Push both metal retaining clips outward at the same time using your hands carefully.

  • If done correctly the memory should pop up at a 45 degree angle.

添加评论

  • Gently pull the memory out of the retainer at the same 45 degree angle.

添加评论

  • Insert the new memory at 45 degree angle.

添加评论

  • Ensure the memory is in all the way before pressing the memory downward until both metal retainer clips are snapped into place.

添加评论

结论

To reassemble your device, reinstall cover plate with two #0 screws.

Thomas Wong

于2012年01月20日注册

23 信誉积分

创作了2篇指南

团队

Cal Poly, Team 11-20, Maness Winter 2012 Cal Poly, Team 11-20, Maness Winter 2012 的会员

CPSU-MANESS-W12S11G20

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 3

总计 1,999