跳转到主内容

Dell Latitude E7440 CMOS Battery Replacement

你所需要的

  1. Dell Latitude E7440 CMOS Battery Replacement, Prepare the laptop: 步骤 1 中的图像 1,1
    • Power off your laptop before starting.

    • Flip the device over so that the vents on the bottom are facing away from you.

  2. Dell Latitude E7440 CMOS Battery Replacement, Release the battery: 步骤 2 中的图像 1,3 Dell Latitude E7440 CMOS Battery Replacement, Release the battery: 步骤 2 中的图像 2,3 Dell Latitude E7440 CMOS Battery Replacement, Release the battery: 步骤 2 中的图像 3,3
    • Place your finger on the latch located in the center of the laptop.

    • Slide the latch to the right, applying enough force to reveal a red indicator.

    • You will hear a soft click when the latch has been disengaged.

  3. Dell Latitude E7440 CMOS Battery Replacement, Remove the battery: 步骤 3 中的图像 1,1
    • Lift the battery by the top, away from the laptop body.

  4. Dell Latitude E7440 CMOS Battery Replacement, CMOS Battery: 步骤 4 中的图像 1,2 Dell Latitude E7440 CMOS Battery Replacement, CMOS Battery: 步骤 4 中的图像 2,2
    • Remove two M2 x 3mm Phillips #0 screws from the base cover.

  5. Dell Latitude E7440 CMOS Battery Replacement: 步骤 5 中的图像 1,2 Dell Latitude E7440 CMOS Battery Replacement: 步骤 5 中的图像 2,2
    • Slide the base cover down slightly and remove it.

  6. Dell Latitude E7440 CMOS Battery Replacement: 步骤 6 中的图像 1,3 Dell Latitude E7440 CMOS Battery Replacement: 步骤 6 中的图像 2,3 Dell Latitude E7440 CMOS Battery Replacement: 步骤 6 中的图像 3,3
    • Position your nylon spudger on the edge of the white connector, in between the connector and the port.

    • Pull back on the connector until the plastic head disconnects from the port on the laptop body.

    • If the connector is stuck, move the broader end of the spudger back and forth across the connector to slowly loosen the connection.

  7. Dell Latitude E7440 CMOS Battery Replacement: 步骤 7 中的图像 1,1
    • Separate the wrapped battery stack from the body by pulling up the wire.

    • You may need to use the flat end of the nylon spudger to separate the battery.

    • The stack is attached using glue, so you might hear a pop when removing it.

    • Reapplying an adhesive to the bottom of the battery is recommended, although not necessary, to keep it in place.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Akash Kedia

于01/24/19注册

1,373 声望

创作了5篇指南

团队

Cal Poly, Team S2-G5, White Winter 2019 Cal Poly, Team S2-G5, White Winter 2019 的会员

CPSU-WHITE-W19S2G5

4 名成员

创作了5篇指南

2条评论

You list no part number for the replacement battery. Do we know the part number? I looked on Dell's website and find nothing. Otherwise, nice write-up!

jess13j - 回复

@jess13j, battery is a CR2032 coin cell.

senzog - 回复

添加评论

浏览统计数据:

过去 24 小时: 4

过去 7 天: 25

过去 30 天: 96

总计 13,049