跳转到主内容

简介

This guide will demonstrate how to replace the hard drive on your Latitude E5430.

  1. Slide the two notches outward. Lift the battery outward and pull.
    • Slide the two notches outward. Lift the battery outward and pull.

  2. Remove two Phillips head screws from the bottom cover.
    • Remove two Phillips head screws from the bottom cover.

  3. Remove the four Phillips head screws from the hard drive caddy.
    • Remove the four Phillips head screws from the hard drive caddy.

    • System memory (RAM) is located here.

    • Low profile WLAN card

    • Various components can be replaced from this stage.

  4. Remove the four Phillips head screws surrounding the hard drive in the caddy.
    • Remove the four Phillips head screws surrounding the hard drive in the caddy.

    • There are two more screws on the other side of the hard drive.

  5. Congratulations, you've done it!
    • Congratulations, you've done it!

结论

After you have installed your new hard drive or SSD, repeat the process in reverse.

另外一个人完成了本指南。

Sam

于2017年02月24日注册

426 信誉积分

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 22

总计 334