简介

Guide to separating the display from the body of the laptop.

配件

无需配件。

Power down the laptop and remove the battery.
  • Power down the laptop and remove the battery.

  • Open the laptop cover all of the way.

添加评论

Locate the notch under the cover at the top of the keyboard Using the spudger as a lever, lift the plastic covering Carefully remove the rest of the covering from right to left
  • Locate the notch under the cover at the top of the keyboard

  • Using the spudger as a lever, lift the plastic covering

  • Carefully remove the rest of the covering from right to left

添加评论

Unscrew the top portion of the keyboard using a #00 screwdriver
  • Unscrew the top portion of the keyboard using a #00 screwdriver

添加评论

Hold keyboard from the top and gently pull towards the LCD screen to remove the keyboard from the case
  • Hold keyboard from the top and gently pull towards the LCD screen to remove the keyboard from the case

  • Don't pull on the keyboard too forcefully because it is attached to the motherboard with a short, thin ribbon cable

添加评论

Once keyboard is out of the case, lay it face-down on the track pad Once keyboard is out of the case, lay it face-down on the track pad
  • Once keyboard is out of the case, lay it face-down on the track pad

添加评论

Using a small spudger, pull back on the black bar to release the blue lever Using a small spudger, pull back on the black bar to release the blue lever
  • Using a small spudger, pull back on the black bar to release the blue lever

添加评论

Pull up on the metal bar connected to the socket to detach the ribbon cable
  • Pull up on the metal bar connected to the socket to detach the ribbon cable

添加评论

Detach cables that connect the display to the body of the laptop
  • Detach cables that connect the display to the body of the laptop

添加评论

Disconnect the black cable attached to the motherboard
  • Disconnect the black cable attached to the motherboard

添加评论

Close the laptop lid Turn the laptop over onto its backside
  • Close the laptop lid

  • Turn the laptop over onto its backside

  • Unscrew the two screws shown in the picture using a #00 screwdriver

添加评论

Face the laptop's back ports towards you Unscrew the two screws labeled in the picture using a #00 screwdriver
  • Face the laptop's back ports towards you

  • Unscrew the two screws labeled in the picture using a #00 screwdriver

添加评论

Turn the laptop over again so it's right-side up
  • Turn the laptop over again so it's right-side up

  • Open the display, and pull the display up and out of the laptop's body

添加评论

Remove the circular rubber pads as outlined in the picture using a spudger
  • Remove the circular rubber pads as outlined in the picture using a spudger

添加评论

Unscrew the screws that were under the rubber circles using the #00 screwdriver
  • Unscrew the screws that were under the rubber circles using the #00 screwdriver

添加评论

Carefully use a spudger to work around the edge of the screen to lift off the plastic cover
  • Carefully use a spudger to work around the edge of the screen to lift off the plastic cover

  • Be very careful while doing this as the plastic snaps easily

添加评论

Remove the screws outlined in the picture
  • Remove the screws outlined in the picture

添加评论

Carefully lift the LCD screen out of its casing
  • Carefully lift the LCD screen out of its casing

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

13等其他人完成本指南。

Miguel Wong

于2010年04月15日注册

437 信誉积分

创作了3篇指南

团队

Cal Poly, Team 24-35, Regan Spring 2010 Cal Poly, Team 24-35, Regan Spring 2010 的会员

CPSU-REGAN-S10S24G35

4 名成员

创作了4篇指南

Check out this replacement screen at a great price on bcdelectrostore.com

http://www.bcdelectrostore.com/magento/l...

bob harris - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 16

过去的30天: 79

总计 29,952