跳转到主内容

简介

In this guide, we will be showing you how to remove and replace the Hard Drive.

配件

没有特定配件。

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

  1. Remove the four screws that secure the hard-drive assembly.
    • Remove the four screws that secure the hard-drive assembly.

  2. Turn the computer over and lift the hard-drive assembly out of the hard-drive bay to disconnect the hard-drive assembly from the connector on the system board.
    • Turn the computer over and lift the hard-drive assembly out of the hard-drive bay to disconnect the hard-drive assembly from the connector on the system board.

  3. Pull the interposer to disconnect it from the hard drive.
    • Pull the interposer to disconnect it from the hard drive.

  4. Connect the interposer to the NEW hard drive.
    • Connect the interposer to the NEW hard drive.

  5. Align the hard-drive assembly with the connector on the system board and press the hard-drive assembly into the hard-drive bay until it is fully seated.
    • Align the hard-drive assembly with the connector on the system board and press the hard-drive assembly into the hard-drive bay until it is fully seated.

  6. Turn the computer over and replace the four screws that secure the hard-drive assembly.
    • Turn the computer over and replace the four screws that secure the hard-drive assembly.

终点

另外一个人完成了本指南。

Terrence15

于2017年12月18日注册

73,231 信誉积分

创作了442篇指南

团队

Informative Technologies Inc. Informative Technologies Inc. 的会员

Community

38 名成员

创作了1,949篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 4

过去的30天: 15

总计 1,065