跳转到主内容

简介

This guide describes how to access the modem card and replace it.

    • Flip the computer over and place it on a clean level surface.

    • Loosen the screws using a size #0 Phillips screwdriver.

    • The screws do not come completely out.

    • It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

  1. Once the screws are loose, open the panel using a plastic opening tool to access the components below. The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.
    • Once the screws are loose, open the panel using a plastic opening tool to access the components below.

    • The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.

  2. Remove the screw holding the card in place using a size #0 Phillips screwdriver. Gently unplug the card from the connecting black wire using a black spudger.
    • Remove the screw holding the card in place using a size #0 Phillips screwdriver.

    • Gently unplug the card from the connecting black wire using a black spudger.

    • The modem can now be safely removed.

结论

To reassemble your device, follow these instructions in reverse order.

Randy McMillan

于2016年09月21日注册

738 信誉积分

创作了4篇指南

团队

Master Techs Master Techs 的会员

Community

300 名成员

创作了1,014篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 111