简介

Follow this guide to remove the display module.

配件

无需配件。

  1. Remove the battery from the bottom of the laptop.
    • Remove the battery from the bottom of the laptop.

    • Please click on the following link for further instruction on how to remove the battery. Dell Inspiron 9100 Battery Replacement

    • It is important to remove the battery so that you will not be electrocuted while working with the computer's hardware.

    添加评论

  2. Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off.
    • Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off.

    • Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover.

    • Be careful of wire attached to underside of the hinge cover.

    添加评论

    • Pull the small black tab on the right hand side of the laptop.

    • The hinge cover has now been removed.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Flip the laptop over and remove the indicated screws.

    • Flip the laptop back over.

    • Find the two places where the display module is attached to the base of the computer.

    添加评论

    • Disconnect the video card from the display module by gently lifting upwards on the black tab.

    添加评论

    • Lift the display module directly upwards from the base of the computer.

    添加评论

    • The display module has been removed.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Victor

于2011年04月06日注册

187 信誉积分

撰写一个指南

团队

Cal Poly, Team 18-22, Garner Spring 2011 Cal Poly, Team 18-22, Garner Spring 2011 的会员

CPSU-GARNER-S11S18G22

4 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 3,593