修复你的物品 社区 商店

Dell Inspiron 7568 Trackpad Replacement Guide

撰写者： Yash Samant (和另外3个贡献者)
  • 评论： 0
  • 收藏 1
  • 完成 1

难度

中等

步骤

6

所需时间

10分钟

节

2

标志

1

Markup Mishap

标记错误

本指南需要更好的标记。请帮助纠正或制作一些标记批注。

简介

By following the steps in this guide one should be able to replace the trackpad on your device (Dell Inspiron 7568)

工具

配件

没有特定配件。

  1. Remove the ten 7mm Phillips #1 screws on the bottom cover. Remove the bottom cover.

    • Remove the ten 7mm Phillips #1 screws on the bottom cover.

    • Remove the bottom cover.

    编辑

  2. Remove the four 3mm Phillips #1 screws holding the battery. Unhinge the connector cable to the battery.

    • Remove the four 3mm Phillips #1 screws holding the battery.

    • Unhinge the connector cable to the battery.

    • Remove the battery.

    编辑

  4. Unplug the speaker cable and remove the speakers Unplug the speaker cable and remove the speakers

    • Unplug the speaker cable and remove the speakers

    编辑

  5. Unscrew & remove the two 3mm screws (using a ph1 screwdriver bit) holding the touchpad bracket Remove the touchpad bracket

    • Unscrew & remove the two 3mm screws (using a ph1 screwdriver bit) holding the touchpad bracket

    • Remove the touchpad bracket

    编辑

  6. Use a nylon spudger to lift the ZIF connector tab. Gently pull the touchpad ribbon cable free. Use a nylon spudger to lift the ZIF connector tab. Gently pull the keyboard daughter board ribbon cable free. Use a nylon spudger to lift the ZIF connector tab. Gently pull the keyboard daughter board ribbon cable free.

    • Use a nylon spudger to lift the ZIF connector tab. Gently pull the touchpad ribbon cable free.

    • Use a nylon spudger to lift the ZIF connector tab. Gently pull the keyboard daughter board ribbon cable free.

    编辑

  7. Remove the touchpad foil using a spudger or other ESD safe blunt-tip tool. Unscrew & remove the three 2mm wafer screws holding the touchpad. Remove the touchpad.

    • Remove the touchpad foil using a spudger or other ESD safe blunt-tip tool.

    • Unscrew & remove the three 2mm wafer screws holding the touchpad.

    • Remove the touchpad.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Yash Samant

于2017年02月22日注册

373 信誉积分

创作了3篇指南

徽章: 11

+ 8更多徽章

团队

USF Tampa, Team S2-G2, Lacy Spring 2017 USF Tampa, Team S2-G2, Lacy Spring 2017 的会员

USFT-LACY-S17S2G2

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 1

总计 252