配件

无需配件。

Flip to the back side of the laptop
  • Flip to the back side of the laptop

添加评论

Loosen one screw.
  • Loosen one screw.

  • This screw is attached to the panel and cannot be removed.

添加评论

  • Spread out pins on the opposite sides. The chip will spring up at an angle.

  • Place new chip in at a 30 degree angle.

  • Push inward until pins can't be seen.

  • Push RAM down, so it lays flat.

  • Improperly replacing the RAM will cause it to short-circuit.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

May Chauvin

于2011年04月14日注册

186 信誉积分

创作了6篇指南

团队

Cal Poly, Team 12-34, Maness Spring 2011 Cal Poly, Team 12-34, Maness Spring 2011 的会员

CPSU-MANESS-S11S12G34

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 21

总计 3,702