跳转到主内容

修复你的物品

维修的权力

商店

简介

If you want to change/upgrade your motherboard or it is damaged in anyway, this guide will show you how to replace it on your Inspiron.

配件

没有特定配件。

  1. Flip over the laptop so the back is facing upwards.
    • Flip over the laptop so the back is facing upwards.

    • Locate the battery compartment.

    • Make sure your laptop is turned off before disassembly.

  2. Slide both locks away from the center of the battery.
    • Slide both locks away from the center of the battery.

    • After you hear a click, pull out the battery.

    • Follow the same steps to reinstall the battery.

  3. Unscrew the four screws as highlighted in green. Flip the laptop over and open it to view the keyboard. Locate the thin wire highlighted in blue.
    • Unscrew the four screws as highlighted in green.

    • Flip the laptop over and open it to view the keyboard.

    • Locate the thin wire highlighted in blue.

    • Disconnect the keyboard from the laptop by lifting up the latch holding the wire in place.

  4. Close the laptop and flip it over so the bottom is facing upwards. Unscrew the two screws as highlighted in green. Remove the back cover.
    • Close the laptop and flip it over so the bottom is facing upwards.

    • Unscrew the two screws as highlighted in green.

    • Remove the back cover.

    • Slide the CD drive out to locate the final screws.

    • Remove the three screws as circled in red.

  5. This step is tricky and can feel like you are breaking the laptop. Follow the next steps with caution to avoid damaging the laptop.
    • This step is tricky and can feel like you are breaking the laptop. Follow the next steps with caution to avoid damaging the laptop.

    • Remove the top cover by inserting a spudger under the surface.

    • Working clockwise from the blue highlighted area, pry upwards with the spudger to detach the locks.

  6. Make sure the wires as highlighted in green are disconnected before removing the top cover. Remove the cover to access the inner hardware of the laptop.
    • Make sure the wires as highlighted in green are disconnected before removing the top cover.

    • Remove the cover to access the inner hardware of the laptop.

  7. Make sure the SIM card has already been removed. If not, remove it now.
    • Make sure the SIM card has already been removed. If not, remove it now.

    • Carefully unplug the four ports connecting to the computer (the prying tool may come in handy when using it on the ports).

  8. Remove all 10 screws on the motherboard using the Phillips #0 screwdriver. Remove all 10 screws on the motherboard using the Phillips #0 screwdriver.
    • Remove all 10 screws on the motherboard using the Phillips #0 screwdriver.

  9. Carefully lift the motherboard at an angle, and slowly pull out the final port. You will find the port on the bottom of the motherboard shown in the first picture.
    • Carefully lift the motherboard at an angle, and slowly pull out the final port.

    • You will find the port on the bottom of the motherboard shown in the first picture.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

frank scott

于2018年09月21日注册

233 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 10

总计 717