简介

How to remove and replace the hard-drive

    • Lift the latch and disconnect the hard-drive cable from the system board.

    • Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

    • Lift the hard-drive assembly from the palm rest and keyboard assembly.

    • Remove the screws that secure the hard-drive bracket to the hard drive.

  1. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

    • Lift the hard drive from the hard-drive bracket.

    • Disconnect the interposer from the hard drive.

    • Connect the interposer to the hard drive.

    • Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

    • Replace the screws that secure the hard-drive bracket to the hard drive.

    • Place the hard-drive assembly on the palm rest and keyboard assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly

    • Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

    • Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.

结论

To reassemble your device, follow these instructions in reverse order.

darrius

于2018年03月26日注册

5,072 信誉积分

创作了30篇指南

团队

Informative Technologies Inc. Informative Technologies Inc. 的会员

Community

15 名成员

创作了925篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 7

总计 40