跳转到主内容

简介

This guide will most likely be utilized if one of the RAM modules becomes corrupted or you wish to upgrade to a higher amount of RAM if applicable.

配件

没有特定配件。

  1. Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.
    • Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.

    • Turn the laptop over to its back.

  2. Slide the release latch while simultaneously pulling backwards on the battery.
    • Slide the release latch while simultaneously pulling backwards on the battery.

  3. Slide the battery out of the battery bay.
    • Slide the battery out of the battery bay.

  4. Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.
    • Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.

    • The screws are connected to the base cover by a washer anddo not remove from the base cover.

  5. Carefully lift the base cover vertically away from the laptop. Carefully lift the base cover vertically away from the laptop.
    • Carefully lift the base cover vertically away from the laptop.

  6. Spread apart the securing clips on each end of the memory stick until the memory stick pops up.
    • Spread apart the securing clips on each end of the memory stick until the memory stick pops up.

    • Remove the memory stick from the laptop.

    • Repeat these steps to remove the second memory stick.

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Nathan Lemay

于2014年04月16日注册

2,896 信誉积分

创作了15篇指南

团队

Cal Poly, Team 9-14, Regan Spring 2014 Cal Poly, Team 9-14, Regan Spring 2014 的会员

CPSU-REGAN-S14S9G14

4 名成员

创作了15篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 15

总计 1,894