跳转到主内容

简介

This guide will be utilized if you are having issues with reading disks and it is not a firmware problem.

  1. Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.
    • Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.

    • Turn the laptop over to its back.

  2. Slide the release latch while simultaneously pulling backwards on the battery.
    • Slide the release latch while simultaneously pulling backwards on the battery.

  3. Slide the battery out of the battery bay.
    • Slide the battery out of the battery bay.

  4. Flip the laptop to its back side.
    • Flip the laptop to its back side.

    • Remove the screw (5mm Phillips #1) that secures the Optical Disk Drive on the back of the laptop.

  5. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive.
    • Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Nathan Lemay

于2014年04月16日注册

2,875 信誉积分

创作了15篇指南

团队

Cal Poly, Team 9-14, Regan Spring 2014 Cal Poly, Team 9-14, Regan Spring 2014 的会员

CPSU-REGAN-S14S9G14

4 名成员

创作了15篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 1,817