跳转到主内容

简介

In this guide, we will be showing you how to remove and replace the Memory Modules.

配件

没有特定配件。

  1. Turn off the computer.
    • Turn off the computer.

    • Disconnect the charging cable from the computer.

    • Failure to turn off the device and disconnect the cable could lead to personal injury or device damage.

    • Flip the computer upside down.

  2. Remove the captive screw located on the top section of the back panel, using a Philips #1 screwdriver. Keep in mind that the screw cannot be fully removed from the panel, even when fully loosened. Keep in mind that the screw cannot be fully removed from the panel, even when fully loosened.
    • Remove the captive screw located on the top section of the back panel, using a Philips #1 screwdriver.

    • Keep in mind that the screw cannot be fully removed from the panel, even when fully loosened.

  3. Use the blue, plastic opening tool to gently pry a section of the back panel open. Next slide the opening tool around the back panel to disconnect the clips holding the panel in place. After the clips have been disconnected, the back panel can then be easily lifted off the computer.
    • Use the blue, plastic opening tool to gently pry a section of the back panel open.

    • Next slide the opening tool around the back panel to disconnect the clips holding the panel in place.

    • After the clips have been disconnected, the back panel can then be easily lifted off the computer.

  4. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops up.

  5. Slide and remove the memory module from the memory-module slot.
    • Slide and remove the memory module from the memory-module slot.

  6. Align the notch on the NEW memory module with the tab on the memory-module slot.
    • Align the notch on the NEW memory module with the tab on the memory-module slot.

  7. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
    • Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.

    • NOTE: If you do not hear the click, remove the memory module and reinstall it.

终点

2等其他人完成本指南。

Terrence15

于2017年12月18日注册

78,067 信誉积分

创作了441篇指南

团队

Informative Technologies Inc. Informative Technologies Inc. 的会员

Community

38 名成员

创作了1,960篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 10

总计 815