简介

In this guide, we will show you how to remove and replace the Display Assembly.

配件

无需配件。

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in  Before You Begin.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer)

  • Disconnect the display cable and the camera cable from their respective system board connectors.

添加评论

Remove the six screws (three on each side) that secure the display assembly to the computer base.
  • Remove the six screws (three on each side) that secure the display assembly to the computer base.

添加评论

  • Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.

添加评论

  • Lift the display assembly off the computer.

添加评论

  • Place the NEW display assembly in position and replace the six screws (three on each side) of the display assembly.

添加评论

  • Route the Mini-Card antenna cables through the routing guides.

添加评论

  • Connect the display cable and the camera cable to their respective system board connectors.

添加评论

终点

Terrence15

于2017年12月18日注册

69,461 信誉积分

创作了442篇指南

团队

Informative Technologies Inc. Informative Technologies Inc. 的会员

Community

15 名成员

创作了917篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 14