简介

This guide will provide information needed to replace your Dell Inspiron 13-7359 hard drive. You will need a phillips #0 screwdriver and a small plastic spudger.

  1. Flip your device over so the back cover is facing you.
    • Flip your device over so the back cover is facing you.

    • Using a Phillips #0 Screwdriver, remove the ten 7mm screws holding the back cover in place.

  2. Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.
    • Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Unscrew and remove the 2 of the 3mm Phillips head screws holding the hard drive in place.
    • Unscrew and remove the 2 of the 3mm Phillips head screws holding the hard drive in place.

  5. Lift and hold the hard drive in your left hand. Use your right hand to grab hold of the black wire connector attached on the right of the hard drive.
    • Lift and hold the hard drive in your left hand.

    • Use your right hand to grab hold of the black wire connector attached on the right of the hard drive.

    • Carefully pull the connector away from the hard drive to completely disconnect from the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Valentin Medina

于2018年01月30日注册

545 信誉积分

创作了3篇指南

团队

Baylor, Team S1-G6, Johnson Spring 2018 Baylor, Team S1-G6, Johnson Spring 2018 的会员

BU-JOHNSON-S18S1G6

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 15

过去的30天: 61

总计 450