跳转到主内容

简介

The Hard Drive is your main storage place on your laptop. This is responsible for holding everything on your laptop from simple documents to your installed operating system. Also adding a bigger hard drive might speed up your laptop if your current one is full or corrupt

  1. Before disassembling your laptop, be sure it is powered off. Remove the ten 7.5mm screws that secure the back panel with the Phillips #0 head Use the plastic opening tool to remove the back panel.
    • Before disassembling your laptop, be sure it is powered off.

    • Remove the ten 7.5mm screws that secure the back panel with the Phillips #0 head

    • Use the plastic opening tool to remove the back panel.

  2. Remove the two 3mm screws with the Phillips #0 head that  hold down the battery. Remove the Hard Drive wire from the battery clip by detaching the wire
    • Remove the two 3mm screws with the Phillips #0 head that hold down the battery.

    • Remove the Hard Drive wire from the battery clip by detaching the wire

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Gently remove the battery from the rest of the device.
    • Gently remove the battery from the rest of the device.

  5. Locate the Hard Drive. Remove the two 3mm screws from Hard Drive with the Phillips #0 head.
    • Locate the Hard Drive.

    • Remove the two 3mm screws from Hard Drive with the Phillips #0 head.

    • Disconnect the wire attached to the system board by lifting up the tape.

    • Remove the tape tab from the Hard Drive by lifting the tape up and off of the Hard Drive unit.

  6. Once disconnected from the tape and the connector is free, lift the Hard Drive unit from the rest of the device by grasping each side with thumb and index or middle finger. Once disconnected from the tape and the connector is free, lift the Hard Drive unit from the rest of the device by grasping each side with thumb and index or middle finger. Once disconnected from the tape and the connector is free, lift the Hard Drive unit from the rest of the device by grasping each side with thumb and index or middle finger.
    • Once disconnected from the tape and the connector is free, lift the Hard Drive unit from the rest of the device by grasping each side with thumb and index or middle finger.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Chase Sparkman

于2015年09月30日注册

461 信誉积分

创作了2篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 15

过去的30天: 55

总计 7,391