简介

In this guide, we will show you how to remove and replace the Display Assembly.

配件

无需配件。

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Peel off the pieces of tape that secure the display cable and touch-screen board-cable to the system board.

  2. Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.
    • Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.

  3. Turn the computer over and open the display as far as possible.
    • Turn the computer over and open the display as far as possible.

  4. CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.
    • CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.

    • Place the computer face down on a flat surface.

  5. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  6. Remove the screws that secure the display assembly to the palm-rest assembly.
    • Remove the screws that secure the display assembly to the palm-rest assembly.

  7. Lift the display assembly off the palm-rest assembly.
    • Lift the display assembly off the palm-rest assembly.

  8. Place the NEW display assembly face down on the palm-rest assembly.
    • Place the NEW display assembly face down on the palm-rest assembly.

  9. Align the screw holes on the display hinges with the screw holes on the palm-rest assembly.
    • Align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

    • Close the display and turn the computer over.

  10. Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables. Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables.
    • Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables.

  11. Adhere the pieces of tape that secure the display cable and the touch-screen board-cable to their respective connectors on the system board.
    • Adhere the pieces of tape that secure the display cable and the touch-screen board-cable to their respective connectors on the system board.

结论

To reassemble your device, follow these instructions in reverse order.

Terrence15

于2017年12月18日注册

70,653 信誉积分

创作了442篇指南

团队

Informative Technologies Inc. Informative Technologies Inc. 的会员

Community

15 名成员

创作了925篇指南

添加评论

浏览统计数据:

过去的24小时: 6

过去的7天: 13

过去的30天: 58

总计 540