简介
In this guide, we will show you how to remove and replace the Display Assembly.
你所需要的
-
-
Disconnect the Mini-Card antenna cables from the Mini-Card(s).
-
-
-
Remove the two screws (one on each side) that secure the display assembly to the computer base.
-
-
-
-
Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
-
-
-
Route the Mini-Card antenna cables through the routing guides on the computer base.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.