跳转到主内容

简介

It is advised to proceed with caution when carrying out this procedure. Damage to the sensitive electronic components may occur.

配件

没有特定配件。

  1. Remove the (10) P58F black screws on the back cover using the Phillips #0 screwdriver. After removing the screws, remove the back cover using a plastic or metal spudger. After removing the screws, remove the back cover using a plastic or metal spudger.
    • Remove the (10) P58F black screws on the back cover using the Phillips #0 screwdriver.

    • After removing the screws, remove the back cover using a plastic or metal spudger.

  2. Unscrew the 3.7mm screw that attaches the solid state drive with the Phillips #0 screwdriver.
    • Unscrew the 3.7mm screw that attaches the solid state drive with the Phillips #0 screwdriver.

  3. Gently remove the solid state drive.
    • Gently remove the solid state drive.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Lucas Fisher

于2019年04月01日注册

211 信誉积分

创作了2篇指南

团队

IUPUI, Team S2-G1, Harley Spring 2019 IUPUI, Team S2-G1, Harley Spring 2019 的会员

IUPUI-HARLEY-S19S2G1

3 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 179