修复你的物品 社区 商店

Dell Alienware 13 Touch pad Replacement

简介

This guide will show the user how to replace a broken touch pad that is not functioning properly on a Dell Alienware 13 laptop.

你所需要的

  1. Dell Alienware 13 Touch pad Replacement, Base Panel: 步骤 1 中的图像 1，1

    • Working on an electrical device while plugged in can cause injury due to electrical shock. Ensure that all external power is disconnected from the device.

    • Close the device and turn the device over.

    编辑

  2. Dell Alienware 13 Touch pad Replacement: 步骤 2 中的图像 1，1

    • Remove (2) 5 mm Phillips head screws attaching the small access panel to the base using a Phillips # 1 screwdriver.

    • The (2) screws are attached to the base panel with retaining clips and won't completely detach from the panel.

    编辑

  3. Dell Alienware 13 Touch pad Replacement: 步骤 3 中的图像 1，3 Dell Alienware 13 Touch pad Replacement: 步骤 3 中的图像 2，3 Dell Alienware 13 Touch pad Replacement: 步骤 3 中的图像 3，3

    • Remove the small access panel using a heavy duty spudger.

    编辑

  4. Dell Alienware 13 Touch pad Replacement, Touch pad: 步骤 4 中的图像 1，2 Dell Alienware 13 Touch pad Replacement, Touch pad: 步骤 4 中的图像 2，2

    • Disconnect the battery cable from the battery cable terminal.

    编辑

  5. Dell Alienware 13 Touch pad Replacement: 步骤 5 中的图像 1，1

    • Remove (4) 6 mm Phillips head screws from the solid-state metal drive bracket, using a Phillips # 1 screwdriver.

    编辑

  6. Dell Alienware 13 Touch pad Replacement: 步骤 6 中的图像 1，2 Dell Alienware 13 Touch pad Replacement: 步骤 6 中的图像 2，2

    • Grab the pull tab to pivot the solid-state drive bracket upwards. Remove the bracket from the computer base.

    编辑

  8. Dell Alienware 13 Touch pad Replacement: 步骤 7 中的图像 1，2 Dell Alienware 13 Touch pad Replacement: 步骤 7 中的图像 2，2

    • Using the pull tab, disconnect the black solid-state drive cable from the system board.

    编辑

  9. Dell Alienware 13 Touch pad Replacement: 步骤 8 中的图像 1，1

    • Remove (2) 3 mm Phillips head screws, using a Phillips # 0 screwdriver, that connect the solid-state drive assembly to the computer base.

    编辑

  10. Dell Alienware 13 Touch pad Replacement: 步骤 9 中的图像 1，2 Dell Alienware 13 Touch pad Replacement: 步骤 9 中的图像 2，2

    • Lift up on the solid-state drive assembly to remove it from the computer base.

    编辑

  11. Dell Alienware 13 Touch pad Replacement: 步骤 10 中的图像 1，2 Dell Alienware 13 Touch pad Replacement: 步骤 10 中的图像 2，2

    • Locate two cables labeled, "KB Backlight" (orange) and "KB Membrane" (black). Lift up on the latches to disconnect the cables from the system board.

    编辑

  12. Dell Alienware 13 Touch pad Replacement: 步骤 11 中的图像 1，3 Dell Alienware 13 Touch pad Replacement: 步骤 11 中的图像 2，3 Dell Alienware 13 Touch pad Replacement: 步骤 11 中的图像 3，3

    • Remove (8) 9 mm Phillips head screws using a Phillips # 1 screwdriver, that secures the palm-rest assembly to the computer base.

    • Remove (4) 8 mm Phillips head screws using a Phillips # 1 screwdriver.

    • Remove (2) 7 mm Phillips head screws using a Phillips # 1 screwdriver.

    编辑

  13. Dell Alienware 13 Touch pad Replacement: 步骤 12 中的图像 1，2 Dell Alienware 13 Touch pad Replacement: 步骤 12 中的图像 2，2

    • Lift the computer base slightly towards you and push the release tabs on the palm-rest assembly until it pops out using a spudger.

    编辑

  14. Dell Alienware 13 Touch pad Replacement: 步骤 13 中的图像 1，3 Dell Alienware 13 Touch pad Replacement: 步骤 13 中的图像 2，3 Dell Alienware 13 Touch pad Replacement: 步骤 13 中的图像 3，3

    • Turn the computer over and open the display as far as possible.

    • Using a plastic spudger, pry up along the edges of the palm-rest assembly.

    • Gently lift the palm-rest assembly.

    编辑

  15. Dell Alienware 13 Touch pad Replacement: 步骤 14 中的图像 1，3 Dell Alienware 13 Touch pad Replacement: 步骤 14 中的图像 2，3 Dell Alienware 13 Touch pad Replacement: 步骤 14 中的图像 3，3

    • Lift the connector latch and disconnect the power-button board cable from the system board. Identified as a cable with a blue tab.

    • Lift the palm-rest assembly off the computer base.

    编辑

  16. Dell Alienware 13 Touch pad Replacement: 步骤 15 中的图像 1，2 Dell Alienware 13 Touch pad Replacement: 步骤 15 中的图像 2，2

    • Disconnect the touch pad cable from the touch pad.

    编辑

  17. Dell Alienware 13 Touch pad Replacement: 步骤 16 中的图像 1，3 Dell Alienware 13 Touch pad Replacement: 步骤 16 中的图像 2，3 Dell Alienware 13 Touch pad Replacement: 步骤 16 中的图像 3，3

    • Remove (4) 3 mm Phillips head screws securing the touch pad to the palm rest assembly using a Phillips # 0 screwdriver.

    • Lift up and remove the touch pad from the palm rest assembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Adam Russell

于09/26/16注册

898 声望

创作了6篇指南

徽章: 16

+ 13更多徽章

团队

USF Tampa, Team 14-2, Eyestone Fall 2016 USF Tampa, Team 14-2, Eyestone Fall 2016 的会员

USFT-EYESTONE-F16S14G2

3 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 308