修复你的物品 社区 商店

Dell 1907FPc Monitor Power Supply Replacement

简介

Following this guide involves completely disassembling the monitor. This process isn't terribly difficult, just time consuming.

你所需要的

  1. Dell 1907FPc Monitor Power Supply Replacement, Power Supply: 步骤 1 中的图像 1，1

    • Carefully place the monitor face down on a flat surface, being careful to protect the display.

    • Remove the four 10 mm Phillips #2 screws from the back panel.

    编辑

  2. Dell 1907FPc Monitor Power Supply Replacement: 步骤 2 中的图像 1，1

    • Flip the monitor back over, so that the display is facing you.

    • Use a spudger to remove the front bezel by unsnapping it in a counter clockwise fashion, starting at the bottom right, and ending at the button panel.

    编辑

  3. Dell 1907FPc Monitor Power Supply Replacement: 步骤 3 中的图像 1，1

    • Slowly unsnap the bezel around the buttons.

    • Be careful to not fully remove the bezel here, because a ribbon cable attaches the buttons to the monitor.

    编辑

  4. Dell 1907FPc Monitor Power Supply Replacement: 步骤 4 中的图像 1，1

    • Carefully flip the monitor back over, making sure to keep the front bezel in place.

    • Lift the back cover off of the rest of the monitor.

    编辑

  5. Dell 1907FPc Monitor Power Supply Replacement: 步骤 5 中的图像 1，3 Dell 1907FPc Monitor Power Supply Replacement: 步骤 5 中的图像 2，3 Dell 1907FPc Monitor Power Supply Replacement: 步骤 5 中的图像 3，3

    • Locate the USB port cover on the right hand side of the monitor.

    • Remove the one 5 mm Phillips #2 screw.

    • Remove the USB port cover by sliding it out and away from the monitor.

    编辑

  7. Dell 1907FPc Monitor Power Supply Replacement: 步骤 6 中的图像 1，2 Dell 1907FPc Monitor Power Supply Replacement: 步骤 6 中的图像 2，2

    • Disconnect the USB ports by gentling grasping and pulling on the connector.

    编辑

  8. Dell 1907FPc Monitor Power Supply Replacement: 步骤 7 中的图像 1，1

    • Remove the five 5 mm Phillips #2 screws from the back panel.

    编辑

  9. Dell 1907FPc Monitor Power Supply Replacement: 步骤 8 中的图像 1，2 Dell 1907FPc Monitor Power Supply Replacement: 步骤 8 中的图像 2，2

    • Remove the four 4 mm Phillips #2 screws that secure the monitor mount release mechanism to the panel.

    • Set this mechanism off to the side, taking care to keep it all in one piece.

    编辑

  10. Dell 1907FPc Monitor Power Supply Replacement: 步骤 9 中的图像 1，2 Dell 1907FPc Monitor Power Supply Replacement: 步骤 9 中的图像 2，2

    • Use a 5 mm nut driver to remove the four 12 mm standoff screws securing the video connectors to the panel.

    编辑

  11. Dell 1907FPc Monitor Power Supply Replacement: 步骤 10 中的图像 1，2 Dell 1907FPc Monitor Power Supply Replacement: 步骤 10 中的图像 2，2

    • Use the tweezers to lift up the seven security tabs that secure the back panel to the rest of the monitor.

    • If the security tabs are held down too tightly, use the spudger to pry them up, and then finish them off with the tweezers.

    编辑

  12. Dell 1907FPc Monitor Power Supply Replacement: 步骤 11 中的图像 1，3 Dell 1907FPc Monitor Power Supply Replacement: 步骤 11 中的图像 2，3 Dell 1907FPc Monitor Power Supply Replacement: 步骤 11 中的图像 3，3

    • Lift up on the back panel to remove it from the rest of the monitor.

    • Be careful when doing so, as the edges of the back panel can be very sharp.

    编辑

  13. Dell 1907FPc Monitor Power Supply Replacement: 步骤 12 中的图像 1，2 Dell 1907FPc Monitor Power Supply Replacement: 步骤 12 中的图像 2，2

    • The power supply has several large capacitors (they look like little cylinders), that can shock you if they discharge. Be careful not to touch them as you continue to work.

    • Use the tweezers to remove the four connectors from the power supply board.

    编辑

  14. Dell 1907FPc Monitor Power Supply Replacement: 步骤 13 中的图像 1，1

    • Remove the five 7 mm Phillips #2 screws from the power supply board.

    编辑

  15. Dell 1907FPc Monitor Power Supply Replacement: 步骤 14 中的图像 1，2 Dell 1907FPc Monitor Power Supply Replacement: 步骤 14 中的图像 2，2

    • Open up the clip securing the wires running between the power supply and video boards.

    • Gently remove the connector running from the video board to the power supply board.

    编辑

  16. Dell 1907FPc Monitor Power Supply Replacement: 步骤 15 中的图像 1，2 Dell 1907FPc Monitor Power Supply Replacement: 步骤 15 中的图像 2，2

    • The power supply board can now be removed.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

作者

与2其他贡献者

Geoff Wacker

于09/30/13注册

89,901 声望

创作了89篇指南

徽章: 44

+ 41更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 30

总计 6,207