修复你的物品 社区 商店

Definitive Technology W7 Speaker Replacement

简介

This guide will teach you how to remove the speaker from the Definitive Technology W7

你所需要的

  1. Definitive Technology W7 Speaker Replacement, Speaker: 步骤 1 中的图像 1，1

    • Use the metal spudger to pry off the panel at the top of the device.

    • The top panel has the device logo in the center.

    • Use the flat end of the metal spudger and place it between the gaps of the top panel and slowly pry the panel off.

    编辑

  2. Definitive Technology W7 Speaker Replacement: 步骤 2 中的图像 1，1

    • Remove the thirteen Phillips #0 screws.

    编辑

  3. Definitive Technology W7 Speaker Replacement: 步骤 3 中的图像 1，1

    • Remove the black panel.

    编辑

  4. Definitive Technology W7 Speaker Replacement: 步骤 4 中的图像 1，2 Definitive Technology W7 Speaker Replacement: 步骤 4 中的图像 2，2

    • After you remove the black panel, you will see that the device is covered with a gray mesh, secured with a drawstring.

    • Flick the switch on the middle of the lock down to loosen the sack.

    编辑

  6. Definitive Technology W7 Speaker Replacement: 步骤 5 中的图像 1，1

    • After you have flicked the switch loosen the sack and pull the sack down which will reveal the speaker.

    编辑

  7. Definitive Technology W7 Speaker Replacement: 步骤 6 中的图像 1，1

    • Remove the four screws on top of the device on each corner with a Phillips #0 screwdriver.

    编辑

  8. Definitive Technology W7 Speaker Replacement: 步骤 7 中的图像 1，1

    • Gently lift the top cover off the device.

    编辑

  9. Definitive Technology W7 Speaker Replacement: 步骤 8 中的图像 1，1

    • If you now look inside the device, you will see the speaker which is the large cylinder on the inner side of the device.

    编辑

  10. Definitive Technology W7 Speaker Replacement: 步骤 9 中的图像 1，2 Definitive Technology W7 Speaker Replacement: 步骤 9 中的图像 2，2

    • Remove the four Phillips #0 screws around the speaker holding it in place.

    • Now lay the device on its side with the speaker facing upward, then unscrew the screws around the speaker.

    编辑

  11. Definitive Technology W7 Speaker Replacement: 步骤 10 中的图像 1，1

    • Stand the device upright and carefully pull the speaker out of the device with the wires still intact.

    编辑

  12. Definitive Technology W7 Speaker Replacement: 步骤 11 中的图像 1，1

    • Now grab the end of the wire connecting the device to the speaker itself.

    • Slowly and carefully pull the wires away from the speaker.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Jamari Brewster

于10/26/22注册

193 声望

撰写一个指南

徽章: 3

团队

UMass Dartmouth, Team 2-5, Petersen Fall 2022 UMass Dartmouth, Team 2-5, Petersen Fall 2022 的会员

UMASSD-PETERSEN-F22S2G5

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 6

总计 226