修复你的物品 社区 商店

DeWalt DWE4011 Power Switch Replacement

简介

The power switch is for turning the device on and off. It can have trouble and not work if the button in the switch box wears out. This is a guide on how to repair the power switch

你所需要的

  1. DeWalt DWE4011 Power Switch Replacement, Power Switch: 步骤 1 中的图像 1，1

    • Turn to the bottom of the device and remove the 1 1/4" screw shown using a T15 Torx Screwdriver.

    翻译

  2. DeWalt DWE4011 Power Switch Replacement: 步骤 2 中的图像 1，1

    • Remove the outer casing by pulling the end handle away from the field case.

    翻译

  4. DeWalt DWE4011 Power Switch Replacement: 步骤 3 中的图像 1，1

    • Unscrew the pin that is holding the main power cord in place and remove the cord.

    翻译

  5. DeWalt DWE4011 Power Switch Replacement: 步骤 4 中的图像 1，2 DeWalt DWE4011 Power Switch Replacement: 步骤 4 中的图像 2，2

    • Pull back the tab holding the switch box in place using a nylon spudger. There is one on top and bottom shown in the image.

    翻译

  6. DeWalt DWE4011 Power Switch Replacement: 步骤 5 中的图像 1，1

    • Remove the switch box entirely from its normal position. Gently pull off the connections from the switch box to the motor.

    翻译

  7. DeWalt DWE4011 Power Switch Replacement: 步骤 6 中的图像 1，2 DeWalt DWE4011 Power Switch Replacement: 步骤 6 中的图像 2，2

    • Using a small Phillips head screwdriver, remove the screws that hold the white colored wires from the power cord in place.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 30

总计 1,112