修复你的物品 社区 商店

DeWalt DWE4011 Carbon Brushes Replacement

简介

The carbon brushes are one part that both wears out quickly and can cause a wide variety of problems if faulty. Follow these simple steps to replace them.

你所需要的

  1. DeWalt DWE4011 Carbon Brushes Replacement, Carbon Brushes: 步骤 1 中的图像 1，1

    • Turn to the bottom of the device and remove the 5/8" (17mm) T15 Torx screw shown using a T15 Torx Screwdriver.

    翻译

  2. DeWalt DWE4011 Carbon Brushes Replacement: 步骤 2 中的图像 1，1

    • Remove the outer casing to expose the brushes by pulling the end handle away from the field case.

    翻译

  4. DeWalt DWE4011 Carbon Brushes Replacement: 步骤 3 中的图像 1，2 DeWalt DWE4011 Carbon Brushes Replacement: 步骤 3 中的图像 2，2

    • Locate both carbon brushes on either side of the device.

    翻译

  5. DeWalt DWE4011 Carbon Brushes Replacement: 步骤 4 中的图像 1，1

    • Using the iFixit opening tool, remove the female terminal connecting the carbon brush wire to the male terminal.

    翻译

  6. DeWalt DWE4011 Carbon Brushes Replacement: 步骤 5 中的图像 1，1

    • Keeping a tight hold the entire time, move the spring covering the carbon brush so that it is behind the male terminal.

    • Be extremely careful, as the spring is tightly coiled and can easily get away from you.

    翻译

  7. DeWalt DWE4011 Carbon Brushes Replacement: 步骤 6 中的图像 1，2 DeWalt DWE4011 Carbon Brushes Replacement: 步骤 6 中的图像 2，2

    • Taking hold of the wire you removed in step 4, gently slide the carbon brush out of its casing and remove it from the device.

    • Flip over the device to reveal the second carbon brush, and repeat steps 4 through 6 on the other side.

    翻译
结论

Congratulations! To put your device back together, simply reverse the above steps.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 8

过去 30 天： 22

总计 1,268