修复你的物品 社区 商店

DeWalt DWD112 Power Cord Replacement

简介

If your drill has no power, the wires in the power cord may have been frayed or become severed. This guide will help you replace the power cord in your DeWalt DWD112.

你所需要的

  1. DeWalt DWD112 Power Cord Replacement, Power Cord: 步骤 1 中的图像 1，1

    • Remove seven TR20 Torx Security screws from the side of the drill.

    编辑

  2. DeWalt DWD112 Power Cord Replacement: 步骤 2 中的图像 1，1

    • Remove the top cover to reveal the inside of the drill.

    • Set the top cover of the drill aside.

    编辑

  3. DeWalt DWD112 Power Cord Replacement: 步骤 3 中的图像 1，1

    • The power cord and the trigger act as a single part and must be replaced together.

    • Using one hand grab the trigger box and with the other grab the end of the wire connecting to the trigger box and disconnect the wire.

    编辑

  5. DeWalt DWD112 Power Cord Replacement: 步骤 4 中的图像 1，1

    • Disconnect the second connected wire from the top of the trigger box.

    编辑

  6. DeWalt DWD112 Power Cord Replacement: 步骤 5 中的图像 1，1

    • Lift the trigger box up to reveal the bottom side.

    • Disconnect the first connected wire from the bottom of the trigger box.

    编辑

  7. DeWalt DWD112 Power Cord Replacement: 步骤 6 中的图像 1，1

    • Disconnect the last wire from the trigger box using the same method from the previous step.

    编辑

  8. DeWalt DWD112 Power Cord Replacement: 步骤 7 中的图像 1，1

    • After all four wires are disconnected, the trigger and power cord are separated from the drill.

    • The power cord and trigger can be set aside if further disassembly is required.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Samantha McSweeney

于03/07/16注册

407 声望

创作了4篇指南

徽章: 6

+ 3更多徽章

团队

UMass Dartmouth, Team 2-3, Isaacson Spring 2016 UMass Dartmouth, Team 2-3, Isaacson Spring 2016 的会员

UMASSD-ISAACSON-S16S2G3

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 7

总计 1,235