DeWalt DW936 Black Cap Replacement

简介

This guide will show you how to replace the black air filter cap located on the top of the motor.

Using a T-20 hex head screw, unscrew the two screws located at the top and bottom of the black air filter. The screws are directly above and below the yellow lettering.

Use your hands to pull the black air filter away from the body of the saw to detach.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

于01/25/17注册

603 声望

创作了5篇指南

CPSU-BANGHART-W17S8G2

3 名成员

创作了5篇指南