修复你的物品 社区 商店

DeWalt DW235G Drill Power Cord Replacement

简介

Follow this guide to replace the power cord to the drill, refer to the troubleshooting guide to determine if you need to replace the power cord. Troubleshooting guide

你所需要的

  1. DeWalt DW235G Drill Power Cord Replacement, Handle Cover: 步骤 1 中的图像 1，1

    • Remove the three screws with a Tr20 hex bit screwdriver.

    • Remove the back cover.

    翻译

  2. DeWalt DW235G Drill Power Cord Replacement, Power Cord: 步骤 2 中的图像 1，1

    • Unscrew the Tr20 Hex Screw connecting the green wire to the power cord.

    • Ensure the power drill is unplugged before disconnecting wires.

    翻译

  4. DeWalt DW235G Drill Power Cord Replacement: 步骤 3 中的图像 1，2 DeWalt DW235G Drill Power Cord Replacement: 步骤 3 中的图像 2，2

    • Disconnect all the wires connected from the trigger box and power cord to the drill motor by pulling on the connectors.

    • There will be 5 wires to disconnect: 2 black, a white, a red, and a blue wire. Remember the locations of where they were connected so you can reconnect them later.

    翻译

  5. DeWalt DW235G Drill Power Cord Replacement: 步骤 4 中的图像 1，1

    • Remove the trigger box and power cord from the main chassis.

    翻译

  6. DeWalt DW235G Drill Power Cord Replacement: 步骤 5 中的图像 1，1

    • Disconnect the wires connecting the power cord to the trigger box by pressing on the clips with a spudger tool.

    • There will be 3 wires to disconnect: A black, white, and green wire. Remember what color attaches to each connector on the trigger box.

    • For reassembly, insert the wires back into the trigger box until a click is heard.

    翻译
结论

The power cord will now be disconnect and you can replace it with a new one.

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 22

过去 30 天： 119

总计 436