修复你的物品 社区 商店

DeWalt DCS380 Grip Disassembly

简介

This guide will show how to disassemble the grip for replacing the trigger or motor armature.

你所需要的

  1. DeWalt DCS380 Grip Disassembly, DeWalt DCS380 Grip Disassembly: 步骤 1 中的图像 1，2 DeWalt DCS380 Grip Disassembly, DeWalt DCS380 Grip Disassembly: 步骤 1 中的图像 2，2

    • Remove the battery before dissasembly.

    • Remove the M3x16mm T10 screw from the back of the grip. Keep it separate from the rest of the grip screws

    • Remove the six M3.63x19 T15 screws from the grip.

    编辑

  3. DeWalt DCS380 Grip Disassembly: 步骤 2 中的图像 1，3 DeWalt DCS380 Grip Disassembly: 步骤 2 中的图像 2，3 DeWalt DCS380 Grip Disassembly: 步骤 2 中的图像 3，3

    • Remove the top half of the grip.

    • Turn the saw over and locate the power connectors to the motor.

    • Use needle nose pliers to remove the spade connectors. Take care not to grab the wires on removal, only the end of the spade terminal.

    • Note the polarity for the power connectors and be sure they are not reversed on reassembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 10

总计 360