修复你的物品 社区 商店

DeWalt DCS380 Blade Shaft Replacement

简介

This guide will explain the disassembly of the shaft housing and replacement of the shaft.

你所需要的

  1. DeWalt DCS380 Blade Shaft Replacement, Removing shoe and boot.: 步骤 1 中的图像 1，1

    • Remove the battery before disassembly.

    • Remove the shoe by pressing the yellow button on the left side of the hand grip.

    编辑

  2. DeWalt DCS380 Blade Shaft Replacement: 步骤 2 中的图像 1，2 DeWalt DCS380 Blade Shaft Replacement: 步骤 2 中的图像 2，2

    • Remove the two M8x18mm T20 bolts from the front plate.

    编辑

  3. DeWalt DCS380 Blade Shaft Replacement: 步骤 3 中的图像 1，1

    • Pull the front of the grip while holding the saw body in place.

    编辑

  5. DeWalt DCS380 Blade Shaft Replacement, Blade Shaft: 步骤 4 中的图像 1，2 DeWalt DCS380 Blade Shaft Replacement, Blade Shaft: 步骤 4 中的图像 2，2

    • Remove the four M8x18mm T20 screws on the top of the gearbox.

    • Pull the top of the gearbox off and set the saw body aside.

    编辑

  6. DeWalt DCS380 Blade Shaft Replacement: 步骤 5 中的图像 1，2 DeWalt DCS380 Blade Shaft Replacement: 步骤 5 中的图像 2，2

    • Remove the black plastic dust covers using the plastic pry bar.

    • Remove the two M5 lock nuts using a 5/16" socket.

    编辑

  7. DeWalt DCS380 Blade Shaft Replacement: 步骤 6 中的图像 1，2 DeWalt DCS380 Blade Shaft Replacement: 步骤 6 中的图像 2，2

    • Turn the housing over and remove the two countersunk M5x17mm T20 bolts from the shaft yoke.

    • Remove the yoke.

    编辑

  8. DeWalt DCS380 Blade Shaft Replacement: 步骤 7 中的图像 1，2 DeWalt DCS380 Blade Shaft Replacement: 步骤 7 中的图像 2，2

    • Pull the shaft out of the front of the housing.

    • Leave the shaft saddle in place over the holes in the cover.

    • Re-grease before re-assembly. If there are metal shavings or pieces of the broken shaft left in the gearbox make sure to remove them before re-greasing.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 9

过去 30 天： 17

总计 845