跳转到主内容

DeWalt D28110 Brush Arm Replacement

你所需要的

  1. DeWalt D28110 Brush Arm Replacement, Disassembling DeWalt D28110 Back Panel Disassembly: 步骤 1 中的图像 1,1
    • Using the T-15 screwdriver, remove the four 22-mm torx screws holding the back panel in place.

    • Unplug the grinder before any disassembly.

  2. DeWalt D28110 Brush Arm Replacement: 步骤 2 中的图像 1,1
    • Use the edge of the spudger to loosen and remove the back panel.

  3. DeWalt D28110 Brush Arm Replacement: 步骤 3 中的图像 1,1
    • Remove the single 20-mm torx screw holding the rear panel in place.

  4. DeWalt D28110 Brush Arm Replacement: 步骤 4 中的图像 1,1
    • Pull back the rear side of the back panel.

  5. DeWalt D28110 Brush Arm Replacement, Brush Arm: 步骤 5 中的图像 1,1
    • Using the T-6 screwdriver, unscrew torx screw holding the arm in place.

  6. DeWalt D28110 Brush Arm Replacement: 步骤 6 中的图像 1,1
    • Gently remove the arm from the assembly.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Kean Wee

于01/22/15注册

495 声望

创作了4篇指南

团队

Cal Poly, Team 18-6, Maness Winter 2015 Cal Poly, Team 18-6, Maness Winter 2015 的会员

CPSU-MANESS-W15S18G6

5 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 16

总计 2,283