修复你的物品 社区 商店

DeWALT Hammer Drill DW511 Chuck Replacement

你所需要的

  1. DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: 步骤 1 中的图像 1，3 DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: 步骤 1 中的图像 2，3 DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: 步骤 1 中的图像 3，3

    • Remove two 45 mm T20 Torx screws.

    • Remove one 30 mm T20 Torx screw.

    翻译

  2. DeWALT Hammer Drill DW511 Chuck Replacement: 步骤 2 中的图像 1，1

    • Pull off the top case and set it aside.

    翻译

  4. DeWALT Hammer Drill DW511 Chuck Replacement: 步骤 3 中的图像 1，3 DeWALT Hammer Drill DW511 Chuck Replacement: 步骤 3 中的图像 2，3 DeWALT Hammer Drill DW511 Chuck Replacement: 步骤 3 中的图像 3，3

    • Grab the gear case cover and gently pull it out just enough to where it exposes the lever assembly.

    • It is important that the brushes are removed before you do this step or you may damage your brushes.

    • The lever assembly can now be lifted out.

    翻译

  5. DeWALT Hammer Drill DW511 Chuck Replacement: 步骤 4 中的图像 1，1

    • With the old lever assembly removed you can now replace it with a new one.

    翻译

  6. DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: 步骤 5 中的图像 1，3 DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: 步骤 5 中的图像 2，3 DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: 步骤 5 中的图像 3，3

    • Gently separate the chuck and plastic housing from the hammer drill body.

    • The removal of the screw from the chuck to separate the plastic housing requires hand strength and specialized tools.

    • The plastic housing is prone to damage if excessive force is applied during the replacement.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 3

总计 600