跳转到主内容

De Longhi Heater temperature Sensor

  1. De Longhi Heater temperature Sensor, Temperature Sensor: 步骤 1 中的图像 1,1
    • Heater unit bricked with PF error (fault temperature sensor)

  2. De Longhi Heater temperature Sensor: 步骤 2 中的图像 1,1
    • Remove the four Phillips screws with a Phillips screwdriver

    • Remove the remaining 2 screws with a Torx screwdriver

    • Remove the cover

  3. De Longhi Heater temperature Sensor: 步骤 3 中的图像 1,1
    • Open the clamps by unhooking them with pliers or using a flathead screwdriver.

  4. De Longhi Heater temperature Sensor: 步骤 4 中的图像 1,1
    • Unscrew the Phillips screw to remove the temperature sensor.

  5. De Longhi Heater temperature Sensor: 步骤 5 中的图像 1,1
    • Unclip the temperature sensor connector from the motherboard.

  6. De Longhi Heater temperature Sensor: 步骤 6 中的图像 1,1
    • The temperature sensor had broken because it was corroded by moisture.

  7. De Longhi Heater temperature Sensor: 步骤 7 中的图像 1,2 De Longhi Heater temperature Sensor: 步骤 7 中的图像 2,2
    • With a soldering iron I proceeded to weld the broken part and to connect the 2 tracks by applying electric wire and some tin.

    • If the component can not be repaired, you can find the complete electronic board replacement on eBay

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

由衷感谢以下译者:

it en

100%

这些译者帮助我们修补全世界! 您也想加入吗?
开始翻译 ›

Smilzo

于11/09/13注册

11,240 声望

创作了39篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 6

过去 30 天: 79

总计 4,336