修复你的物品 社区 商店

DJI Phantom 4 Advanced Remote Controller Motherboard Replacement

简介

This guide will show you how to remove and replace the motherboard of the DJI Phantom 4 Advanced Remote Controller.

Before you begin:

  • Please make sure to completely power off the the controller prior to any replacements.
  • Please read the guide before any replacements in order to familiarize yourself with the process.

你所需要的

  1. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement, Back Panel: 步骤 1 中的图像 1，1

    • Remove the four screws with a Torx T8 screwdriver to access the back con board.

    翻译

  2. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 2 中的图像 1，2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 2 中的图像 2，2

    • Remove three screws using a Phillips #00 screwdriver.

    翻译

  3. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 3 中的图像 1，2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 3 中的图像 2，2

    • With tweezers, gently remove the large con board tab.

    • Use your hands to remove the two small clips. Pull out from the socket, in a horizontal direction.

    翻译

  5. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 4 中的图像 1，2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 4 中的图像 2，2

    • Peel off the rubber grips to access the screw holes.

    • Make sure to save your grips and do not to get them stuck to anything, you are going to want to save the adhesive.

    • Remove the back board and set it aside.

    翻译

  6. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 5 中的图像 1，2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 5 中的图像 2，2

    • Pull apart the back plastic panel.

    • Recommended tool for this would be the metal spudger, but not required.

    • Once the back panel is off, you will have access to the motherboard.

    翻译

  7. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement, Motherboard: 步骤 6 中的图像 1，3 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement, Motherboard: 步骤 6 中的图像 2，3 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement, Motherboard: 步骤 6 中的图像 3，3

    • Disconnect ribbon tabs 1,2,5,8G, and 3.

    • Remove ribbon tab by pulling gently along motherboard. Do not pull straight out.

    • Then remove the plugs

    翻译

  8. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 7 中的图像 1，2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 7 中的图像 2，2

    • With the Phillips #00 screwdriver, remove the two Phillips screws.

    翻译

  9. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: 步骤 8 中的图像 1，1

    • Double check to make sure all tabs, plugs and screws are removed or disconnected.

    • Gently lift motherboard out of the case.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

2条评论

Do you know here can i buy a main board for phantom 4 advanced remote controller?

carl_darklife - 回复

I would like to know too, can’t find one anywhere

Luke James -

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 10

过去 30 天： 26

总计 1,978