简介

I phoned D-Link tech support several times, and they eventually concluded my device was broken, but I got it fixed.

My D-Link dhp w306av would do nothing but blink it's blue (WPS/ENY) LED. None of the support people could fix it with any kind of reset. This is what I managed to do.

  1. (With router unpluged, and no ethernet cable attched) Turn the router on (push in the power button on the side) remember it's not plugged into the wall yet.
    • (With router unpluged, and no ethernet cable attched) Turn the router on (push in the power button on the side) remember it's not plugged into the wall yet.

    添加评论

  2. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Take a pin or micro screwdriver and push in and hold the reset button.
    • Take a pin or micro screwdriver and push in and hold the reset button.

    • Still holding the reset button plug the router into a power outlet.

    • Keep holding down the reset button for at least 15 seconds.

    • If you have the same luck I did your green lights on the side will start to cycle and light up.

    • Now you can go back to your quick install guide that came with the router and set it up again.

    添加评论

结论

hope it works for you

4等其他人完成本指南。

alan

于2013年08月23日注册

212 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 26

过去的30天: 148

总计 4,126