简介

This guide will show how to install the top casing on the CygoLite night rover. It will start from the torn-down position and show the proper installation of the top casing.

Start with the device torn down to just the base, with the internals of the device showing. Place the top casing onto base. Ensure that the rubber gasket is positioned properly between the top and bottom casings
  • Start with the device torn down to just the base, with the internals of the device showing.

  • Place the top casing onto base.

  • Ensure that the rubber gasket is positioned properly between the top and bottom casings

  • Flip the device with the bottom facing upwards.

  • Reinsert and screw in the screws to the bottom casing.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Ryan

于2012年10月22日注册

101 信誉积分

撰写一个指南

团队

Clemson, Team 14-3, Benson Fall 2012 Clemson, Team 14-3, Benson Fall 2012 的会员

CLEM-BENSON-F12S14G3

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 158