简介
Use this guide to replace the "Chop" and "Grind" buttons located on the Cuisinart Mini-Prep DLC-2A.
你所需要的
-
-
Remove the back panel using a Phillips #1 Screwdriver on the four screws that hold it in place.
-
-
-
Locate the Button Panel inside the blender.
-
Using your Phillips #1 Screwdriver, remove the two screws which hold the panel in place.
-
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。