跳转到主内容

Cuisinart DCC-1100 Power Cord Replacement

你所需要的

  1. Cuisinart DCC-1100 Power Cord Replacement, Power Cord: 步骤 1 中的图像 1,2 Cuisinart DCC-1100 Power Cord Replacement, Power Cord: 步骤 1 中的图像 2,2
    • Unplug the maker, remove the coffee pot, and flip upside down.

  2. Cuisinart DCC-1100 Power Cord Replacement: 步骤 2 中的图像 1,2 Cuisinart DCC-1100 Power Cord Replacement: 步骤 2 中的图像 2,2
    • Remove the five 1.6mm Phillips #1 screws from the bottom panel.

    • Remove the bottom panel.

  3. Cuisinart DCC-1100 Power Cord Replacement: 步骤 3 中的图像 1,2 Cuisinart DCC-1100 Power Cord Replacement: 步骤 3 中的图像 2,2
    • Push the power cord inward and away from the plastic protection plate.

  4. Cuisinart DCC-1100 Power Cord Replacement: 步骤 4 中的图像 1,2 Cuisinart DCC-1100 Power Cord Replacement: 步骤 4 中的图像 2,2
    • Remove the two 1.4mm Phillips #0 screws from the plastic protection plate.

    • Remove the plastic protection plate.

  5. Cuisinart DCC-1100 Power Cord Replacement: 步骤 5 中的图像 1,3 Cuisinart DCC-1100 Power Cord Replacement: 步骤 5 中的图像 2,3 Cuisinart DCC-1100 Power Cord Replacement: 步骤 5 中的图像 3,3
    • Remove the two 1.6mm Phillips #1 screws from the heating element.

    • Using a flathead screwdriver to remove the outer clips holding the heating unit in place.

    • Flip the heating element up to allow access to the circuit board.

  6. Cuisinart DCC-1100 Power Cord Replacement: 步骤 6 中的图像 1,2 Cuisinart DCC-1100 Power Cord Replacement: 步骤 6 中的图像 2,2
    • Pull out the circuit board and rest it on the side of the machine.

    • Desolder the power cable from the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Nicholas Eales

于01/25/18注册

263 声望

撰写一个指南

团队

USF Tampa, Team S20-G4, Passmore Spring 2018 USF Tampa, Team S20-G4, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S20G4

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 12

过去 30 天: 34

总计 1,898