修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Creality Ender 3 V2 Extruder Nozzle Replacement

简介

If your Creality Ender 3 V2 is not producing high-quality prints a nozzle replacement may be what is needed to remedy the situation. Perhaps you just want to increase or decrease your nozzle diameter either way this guide will show how to replace the extruder nozzle using the tools included with the printer and with no special skills such as soldering or wire stripping involved. There are no safety hazards. This is a simple straightforward repair that only uses parts and tools included with the 3D printer.

你所需要的

  1. Creality Ender 3 V2 Extruder Nozzle Replacement, Extruder Nozzle: 步骤 1 中的图像 1，1

    • Using your hands, move the extruder carriage to the center of the machine.

    翻译

  2. Creality Ender 3 V2 Extruder Nozzle Replacement: 步骤 2 中的图像 1，1

    • Unscrew the two bolts located on the back of the extruder shroud.

    翻译

  4. Creality Ender 3 V2 Extruder Nozzle Replacement: 步骤 3 中的图像 1，1

    • Remove the shroud to reveal the hot end of the 3D printer. Remove the shroud by pulling straight away from the hot end of the 3D printer.

    翻译

  5. Creality Ender 3 V2 Extruder Nozzle Replacement: 步骤 4 中的图像 1，1

    • Gently remove the silicone sleeve by peeling it away from the hot end.

    翻译

  6. Creality Ender 3 V2 Extruder Nozzle Replacement: 步骤 5 中的图像 1，2 Creality Ender 3 V2 Extruder Nozzle Replacement: 步骤 5 中的图像 2，2

    • Remove the nozzle using the smaller included wrench.

    翻译

  7. Creality Ender 3 V2 Extruder Nozzle Replacement: 步骤 6 中的图像 1，2 Creality Ender 3 V2 Extruder Nozzle Replacement: 步骤 6 中的图像 2，2

    • Screw on new nozzle with your fingers.

    • Don't overtighten the nozzle as it may cause further problems with your device.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

作者

与10其他贡献者

Marc-Anthony Cardoso

于03/24/21注册

235 声望

撰写一个指南

徽章: 7

+ 4更多徽章

团队

UMass Dartmouth, Team S2-G3, Riel Spring 2021 UMass Dartmouth, Team S2-G3, Riel Spring 2021 的会员

UMASSD-RIEL-S21S2G3

1 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 22

过去 7 天： 125

过去 30 天： 625

总计 17,528