步骤 1 Screen



• Before beginning, unplug the printer.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2




• Detach the old screen by removing the screws (M3x8mm) holding it in place.
• The screen is located on the right-hand side of the printer.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Carefully disconnect the cables connecting the old screen to the circuit board.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
• Attach the cables to the new screen, ensuring they are properly seated.
• Double-check the labels to make sure you connect them correctly.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5
• Secure the new screen in place using the screws (M3x8mm) you removed earlier.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 6
• Plug in the printer and power it on. Test the new screen to make sure it's functioning correctly.
• This might involve updating the software.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

<iframe id="dozuki-embed-167425" src="https://zh.ifixit.com/Guide/embed/167425/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-167425"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://zh.ifixit.com/Guide/embed/167425" width="800" height="584" allowfullscreen frameborder="0"></iframe>

预览