修复你的物品 社区 商店

Cooler Master Laptop Fan Replacement

简介

Overheating laptops can be a serious problem. Luckily devices like the Cooler Master Laptop

Fan can help keep your laptop cooler than the fans in your laptop can. This helps extend the life

of your laptop and allows better performance for your laptop as well. However even laptop fans

can fail and need to be replaced.

你所需要的

  1. Cooler Master Laptop Fan Replacement, Fan: 步骤 1 中的图像 1，1

    • Set your laptop cooler on the table and make sure it is not plugged into a laptop or powered on.

    • Never try to open the cooler while plugged in.

    翻译

  2. Cooler Master Laptop Fan Replacement: 步骤 2 中的图像 1，1

    • Flip the Device over and find ten folded metal slots holding the metal cover onto the base.

    翻译

  3. Cooler Master Laptop Fan Replacement: 步骤 3 中的图像 1，3 Cooler Master Laptop Fan Replacement: 步骤 3 中的图像 2，3 Cooler Master Laptop Fan Replacement: 步骤 3 中的图像 3，3

    • Bend each metal flap straight up with the pliers to allow the metal cover to slide off.

    翻译

  4. Cooler Master Laptop Fan Replacement: 步骤 4 中的图像 1，2 Cooler Master Laptop Fan Replacement: 步骤 4 中的图像 2，2

    • Remove the cover and expose the inside of the Cooler.

    翻译

  5. Cooler Master Laptop Fan Replacement: 步骤 5 中的图像 1，2 Cooler Master Laptop Fan Replacement: 步骤 5 中的图像 2，2

    • Unplug the power cable to the fan.

    • Make sure not to apply too much force and disconnect the wires to the device.

    翻译

  7. Cooler Master Laptop Fan Replacement: 步骤 6 中的图像 1，2 Cooler Master Laptop Fan Replacement: 步骤 6 中的图像 2，2

    • On the bottom of the base locate the screw holes under the sticker on the base.

    • Unscrew the three fan screws.

    翻译

  8. Cooler Master Laptop Fan Replacement: 步骤 7 中的图像 1，1

    • Once all the pieces are taken apart, set aside the old fan and prep the new one for installation.

    翻译

  9. Cooler Master Laptop Fan Replacement: 步骤 8 中的图像 1，1

    • Apply a small amount of thermal compound to the base where the fan sets.

    • Make sure to apply thermal compound to keep the fan from overheating and damaging the base.

    翻译

  10. Cooler Master Laptop Fan Replacement: 步骤 9 中的图像 1，2 Cooler Master Laptop Fan Replacement: 步骤 9 中的图像 2，2

    • Connect power cable for the fan and place the cables back in their slots.

    翻译

  11. Cooler Master Laptop Fan Replacement: 步骤 10 中的图像 1，2 Cooler Master Laptop Fan Replacement: 步骤 10 中的图像 2，2

    • Screw fan back onto base.

    翻译

  12. Cooler Master Laptop Fan Replacement: 步骤 11 中的图像 1，1

    • Place cover back on base.

    翻译

  13. Cooler Master Laptop Fan Replacement: 步骤 12 中的图像 1，1

    • Fold all metal flaps back to hold cover on base.

    翻译

  14. Cooler Master Laptop Fan Replacement: 步骤 13 中的图像 1，1

    • Flip it over and it's finished.

    翻译
结论

Plug in the USB to insure proper working condition. And the cooling pad fan replacement is done.

2等其他人完成本指南。

2条评论

Hi there,

I’ve got a Targus Lap Chill Matt (Laptop Cooling Pad 15 - 17" Laptops) but the USB port had worn out and require a new replacement. Does anyone have any examples on how to replace the UBS port from a Laptop Cooler Pad?

Thanks!

rolly - 回复

Hi,

Just wanted to say huge thanks to you for this guideline! I have a Cooler Master Notepal L1 and the fan kept making noises. But now it works totally fine after I was able to open the cover.

Thanks again!

//Parisa

Parisa - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 15

过去 30 天： 84

总计 5,572