修复你的物品 社区 商店

Contour Roam2 Back Door Replacement

简介

This guide will give you step-by-step instructions on how to replace the back door on your Contour Roam2. Follow this guide if it is damaged or the stays button is no longer working.

你所需要的

  1. Contour Roam2 Back Door Replacement, Record Slider: 步骤 1 中的图像 1，1

    • Using the phillips head screwdriver (PH000) locate and remove the 4.45mm (.175in) screw by the 180 degree graphic on the metal ring.

    • The screws in the camera are very small and can strip very easily. Apply consistent pressure when removing screws.

    编辑

  2. Contour Roam2 Back Door Replacement: 步骤 2 中的图像 1，2 Contour Roam2 Back Door Replacement: 步骤 2 中的图像 2，2

    • Rotate the metal ring counterclockwise until completely removed.

    编辑

  3. Contour Roam2 Back Door Replacement: 步骤 3 中的图像 1，2 Contour Roam2 Back Door Replacement: 步骤 3 中的图像 2，2

    • Using the phillips head screwdriver (PH000) remove the two 4.46mm (.175in) screws on each side near the back of the camera.

    编辑

  4. Contour Roam2 Back Door Replacement: 步骤 4 中的图像 1，3 Contour Roam2 Back Door Replacement: 步骤 4 中的图像 2，3 Contour Roam2 Back Door Replacement: 步骤 4 中的图像 3，3

    • Grab the camera on both sides and slide the outer shell forward until completely removed.

    编辑

  6. Contour Roam2 Back Door Replacement: 步骤 5 中的图像 1，1

    • Lift the record slider out.

    • The record slider should come out easily no matter the position (forward or backward).

    编辑

  7. Contour Roam2 Back Door Replacement, Mounting Piece: 步骤 6 中的图像 1，2 Contour Roam2 Back Door Replacement, Mounting Piece: 步骤 6 中的图像 2，2

    • Using the phillips head screwdriver (PH000) remove the two 3.82mm (0.150in) screws on the bottom of mounting piece near the tripod screw-in.

    • The screws in the camera are very small and can strip very easily. Apply consistent pressure when removing screws.

    编辑

  8. Contour Roam2 Back Door Replacement: 步骤 7 中的图像 1，2 Contour Roam2 Back Door Replacement: 步骤 7 中的图像 2，2

    • Open the back door by your thumb and index finger on sides of back door and pull upward.

    编辑

  9. Contour Roam2 Back Door Replacement: 步骤 8 中的图像 1，1

    • Using your thumb, pry sides outward on back of mount piece.

    • This will loosen mount piece for removal in proceeding step.

    • Side can be hard to pry outward. Using a flat tool such as a metal spudger, may help if your thumb is insufficient.

    编辑

  10. Contour Roam2 Back Door Replacement: 步骤 9 中的图像 1，2 Contour Roam2 Back Door Replacement: 步骤 9 中的图像 2，2

    • Remove and replace mount piece.

    编辑

  11. Contour Roam2 Back Door Replacement, Back Door: 步骤 10 中的图像 1，1

    • Using a paper clip or a SIM eject tool size 0.8, push the metal bar out from the spring located on bottom of back door.

    • After removing the metal bar, the spring will become loose and may fall out on its own.

    编辑

  12. Contour Roam2 Back Door Replacement: 步骤 11 中的图像 1，1

    • Remove and replace back door.

    • Door should easily be removed by pulling away from main body of camera.

    • As door is being pulled away, the spring may fall out own its own.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Jamie Maple

于03/11/15注册

310 声望

创作了2篇指南

徽章: 10

+ 7更多徽章

团队

Colorado Springs, Team 4-5, Panko Spring 2015 Colorado Springs, Team 4-5, Panko Spring 2015 的会员

UCCS-PANKO-S15S4G5

3 名成员

创作了10篇指南

一条评论

Where can I get a replacement back door for an original contour roam shipped international? Contour will not reapond to my requests.

The Dude - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 10

总计 1,629